In the contact encoding method, the device to be encoded can be encoded only by leaning on the stylus protruding from the encoder, which simplifies the encoding steps, shortens the encoding time and reduces the work intensity. The encoder can...
TCXH5215 Addressable Fire Hydrant Button (the button) is installed in public places. When there is a fire, pressing the frangible element on the button can send startup signal to the fire alarm control panel and fire pump is activated. After...
1. Base of the detector is shown below. There are 2 conductor pieces with terminals on the base. Detector' 5 loop should be respectively connected with
two terminals (non-polarized) After the base is fixed firmly, rotate the bottom of detector and...
Open installation applied for the module. Insert mode for installation between base and module. When installing, pull down the module, lead the wire through wiring hole, connect it with terminal and push the module onto the base. The mounting hole...
The control panel can be used with all kinds of intelligent fire detectors, input modules, output modules, I/O modules, sounder strobe, fire repeater etc. Forming an alarm linkage integrated control panel, which is the best choice for fire...
It is used to display the fire location and related information of a certain floor or fire zone, and at the same time send out an sounder strobe alarm signals to inform people in nearby areas. * Display fire alarm position and information for...
JB-TB-TC5109 Intelligent Fire Alarm control panel is a new generation of alarm control panel that is designed and developed by our company through researching the fire-fighting market demand and summarizing the fire engineering experience for many...
JB-TB-TC5120Intelligent Fire Alarm Control Panel-tiancheng(TC) The control panel can be used with all kinds of intelligent fire detectors, input modules, output modules, I/O modules, sounder strobe, fire repeater etc. Forming an alarm linkage...
JB-QB-TC5160 Intelligent Fire Alarm Control Panel
The control panel can be used with all kinds of intelligent fire detectors, input modules, output modules, I/O modules, sounder strobe, fire repeater etc. Forming an alarm linkage integrated control...
JB-LT-TC5200 Intelligent Fire Alarm Control Panel-tiancheng(TC)
The control panel can be used with all kinds of intelligent fire detectors, input modules, output modules, I/O modules, sounder strobe, fire repeater etc. Forming an alarm linkage...
Telephone Jack is used to communicate with the central Fire Fighting. Telephone master control unit. Just push fire fighting telephone. handset into the jack & start communication.
The Fire Fighters’ Telephone Jack consists of a single phone...
All-wireless fire alarm products can realize linkage function. Once the front end confirms the real fire alarm, fans and fire hydrants will be linked together to form a simple fire extinguishing and spraying system, which can realize realtime...
