TCXH5215 Fire Hydrant Button

TCXH5215 Addressable Fire Hydrant Button (the button) is installed in public places. When there is a fire, pressing the frangible element on the button can send startup signal to the Fire Alarm Control Panel and fire pump is activated. After receiving the startup signal, the control panel will show address information of the button and generate alarm sound. After the fire pump is activated, the feedback LED of the button is on.

* Suitable for the installation in explosive gas environment with IIC class and temperature group T6
* Simple and convenient installation with plug-in structure design
* The button on the alarm button can be reset by special tool after pressing
* Explosion-proof mark: Exib IIC T6
* Protection level: IP20

Features

1. Plug-in structure. Simple and convenient installation.
2. Alarm by pressing, reset by a special key.
3. Microprocessor controls devices; digital signal communicates the Fire Alarm control panel. Stable and reliable work, good ability to inhibit electromagnetic interference.
4. Electronically addressed. The address can be modified in field. Easy and reliable for commissioning.

Technical Specifications

1. Operating voltage
    Signal bus voltage: loop 24V

2. Operating current
    Standby current: ≤ 0.2mA
    Action current: ≤ 1.5mA

3. Type of Initiating Part：Reusable
4. Initiating Mode：Pressing the frangible element manually
5. Resuming Mode：Manually resumed by a special key 
6. Indicator
    Active LED: Red. Flashes every 3s normally. Illuminates after activated.
   Feedback LED: Green. After fire pump is activated, the LED is on.

7. Programming mode
      Electronically addressed (address range: one address within 1~255).

8. Wiring: 2-wire/6-wire
9. Operating environment
        Class: indoor
        Temperature: -10°C～+55°C
     Relative Humidity: ≤95%, non-condensing

10.Dimension
     90mm×90mm×42 mm (with base)

 11. Material and color of enclosure: ABS; red
 12. Weight: about 120g(with base)
 13. Mounting hole distance: 60mm
 14. Standard: GB 16806-2005

Appearance: The control panel adopts Akzo anti-corrosion coating. No pun-gent smell, anti-static electricity, non-toxic harm, non-pollution, no waste. The cabinet is made of stainless steel, which is not easy to deform and high-end and elegance

The Control Panel Is Equipped With A Fire Alarm And A Fault Output Port. The Output Of 24V In Case Of Fire Al Arm And Fault Effectively Provides A Convenient Way For External Device

Power Box: Equipped With Main Power Supply Detec-Tion Function. Easily Achieved Switching Between The Main And Standby Power. Insurance Of Its Own Can Provide Protection To The Control Panel When The External Current Is Too High

Standby Battery: 12V/12Ah Battery *2, Work For 12 Hours Without Main Power, Work For 3 Hours Without Main Power And Alarm In The Loop. And The Battery Has Its Own Charging Function. Con-Trol Panel Is Exquisite And Beautiful.